CARRO EB-4 S2 PRO COMBO RTR 2.4GZ 6227-F

This is the 2.4GHz radio controlled, glow powered, ready to run,
1/8 scale Thunder Tiger EB-4 S2 Pro Version Competition Buggy
with Red Body.

FEATURES: Chassis: 0.12" (3mm) thick 6061 aluminum with front and rear
stiffeners and composite side guards
Drive: Four wheel shaft
Engine: Thunder Tiger Pro-21BX-R with pull starter, glow plug, air
filter, slide valve carb and polished aluminum tuned pipe
Radio: Ace Cougar PS3 RC 3-channel 2.4GHz with metal gear steering
servo
Shocks: Oil-filled large volume aluminum bodied
Shock Towers: 0.12" (3mm) thick aluminum
Differentials: Planetary type
Fuel Tank: 4.2oz (125cc)
Brake: Single disc
Body: Trimmed and painted with red color scheme, molded plastic rear
wing
Clutch Three-shoe
Clutch Bell: Steel 14 tooth
Main Gear: Steel 46 tooth
Tires: Rectangular pin 1.6" (40mm), 4.3" (110mm) diameter, with foam
inserts
Wheels: 16-spoke, black in color 1.6" (40mm) wide, 3.1" (79mm)
diameter
Caster: Front and rear adjustable, caster/toe-in refers to the angle
of the suspension when viewed from the side of the car in relation
to the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Thunder Tiger guarantees this buggy to be free from defects
in both material and workmanship. This warranty does not cover any
components damaged by use or modification. A part or parts missing
from the kit must be reported within 60 days of purchase. No part
or parts will be sent under warranty without proof of purchase.

INCLUDES: Thunder Tiger EB-4 S2 Pro Buggy with .21 Engine, 2.4GHz 3-channel
Radio, Throttle Servo, Metal Gear Steering Servo, Painted Body,
Rear Wing and Instruction Manual

REQUIRES: Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend
lubricant recommended (do not use more than 10% nitro content for
break-in)
AA Batteries: 12, eight for transmitter and four for battery box
Building and track equipment

SPECS: Vehicle-
Length: 15.5" (394mm)
Width: 8.8" (224mm)
Wheelbase: 12.4 - 12.6" (315mm - 320mm)
Weight: 6.8lbs (3100g) with engine, tuned pipe and servos
Front Caster: Adjustable from 18° - 25°
Rear Toe-In: 1°, 2° or 2.5°
Front Track: Adjustable from 11.6 - 12.6" (295 - 320mm)
Rear Track: 12" (300mm) distance from outer edges of wheels side-to-
side
Body-
Length: 15.1" (385mm)
Width: 8.3" (211mm)
Height: 4" (102mm)

COMMENTS: For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
4 Fr Universals Bushing size not given
4 Rear Universals Bushing size not given
2 8x16mm Spur Gear Assembly 1 DTXC1585
4 8x16mm Fr Diff Assembly 2 DTXC1585
4 8x16mm Rear Diff Assembly 2 DTXC1585
2 Clutch Bell Bearing size not given