MOTOR OS FS-95V (60PA) 4T W/MUFFLER F-5050 30900

Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.

Broad power band for a wide variety of airplanes including models designed for .60 2-stroke and .90 4-stroke engines
Redesigned cylinder head to match angled valve layout for steady power at all times and a perfect balance between high combustion and efficient cooling
Redesigned "Jet Stream" muffler with unique shape for more authentic four stroke sound
Same mounting dimensions, drive hub position and linkage position as the O.S. FS-91 Surpass II, 61FX, 65LA, 75AX, 95AX and FS-110
Two year limited warranty through Hobby Services beginning at date of purchase

O.S. Engines FS-95V Four Stroke Engine with Type F Glow Plug, Muffler Header Pipe with two Locknuts and Instruction Manual

Carburetor Settings
Needle Valve: 2-1/2 - 3 turns from fully closed
Mixture Control Valve: Rotate until slotted head is flush with carb body. After setting needle valve, rotate mixture control valve approximately 45° clockwise to lean the mixture or 45° counter- clockwise to richen mixture
Displacement: 0.951cu in (15.59cc)
Bore: 1.142" (29.0mm)
Stroke: 0.929" (23.8mm)
Practical RPM: 2,100 - 11,000RPM
Power Output: 1.7ps/10,000RPM
Weight: 20.88oz (592g)
Muffler Weight: 2.05oz (58g)
Crankshaft Size: 5/16-24
Height from bottom of Mounting Tab to Pushrod Cover: 3.8" (97.5mm)
Height from bottom of Crankcase to Pushrod Cover: 4.7" (119mm)
Distance from Carburetor to Drive Hub: 4.5" (115.7mm)
Distance/Mounting Hole Centers Same Side: 0.98" (25mm)
Distance/Mounting Hole Centers Opposite Side: 2" (52mm)
Mounting Hole Diameter: 0.16" (4.2mm)
Distance from Drive Hub to end of Crankshaft: 1.5" (37.4mm)
Distance from Drive Hub to center of Engine: 2.6" (66.5mm)
Width at Mounting Tabs: 2.4" (61mm)
Width Below Mounting Tabs: 1.7" (42.6mm)
Height/Mounting Tab Bottom to center of Needle Valve: 0.70" (17.8mm)

$399,00