ONYX 210 AC/DC 4.8~9.6V CHARGE DTXP4210

This is the DuraTrax Onyx 210 AC/DC Peak Charger with Backlit LCD.

Charge currents of 800mA, 1.5A, 3A and 5A plus 4-8 cell NiCd or NiMH compatibility makes this charger great for 1/18-1/8 scale electrics, nitro receiver packs and even transmitter batteries.

FEATURES:

Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells with a capacity range of 750-7500mAh

NiCd and NiMH compatibility with custom peak detection

Pushbutton controls, audible tones and a custom LED with backlight for easy setup and use Selectable charge currents of 800mA, 1.5A, 3A and 5A

Automatic TRICKLE charge fills pack completely after peak charge for optimum battery performance

Precise peak detection algorithm with automatic TRICKLE charge fills packs completely for optimum voltage and run time

Built-in jack included for charging 4 or 5 cell NiCd or NiMH receiver batteries for nitro models and even transmitter batteries LCD shows battery voltage, charge current, time, capacity, battery type and more Small, lightweight switching AC power supply delivers up to 5 amps of charge current Solid state reverse polarity and current overload safety devices FIVE YEAR warranty

INCLUDES:

DuraTrax Onyx 210 AC/DC Sport Peak Charger

SPECS:

AC Input: 110V AC 60Hz

DC Input: 11-15V DC, built-in lead with alligator clips

Battery Types: 4-8 NiCd or NiMH cells (4.8-9.6V)

Battery Capacity Range: 750-7500mAh

Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (40W)

Fast Charge Termination: Peak detection

Fast Charge Safety Timer: 90 minutes

Peak Sensitivity: 8mV for NiCd, 4mV for NiMH

Auto TRICKLE Current: 1/20 fast charge setting

Input Control: 3-pushbuttons

Display Type: 7-segment custom LCD with backlight

Audible Tones: Indicate start, stop, errors

*Output Connections: Built-in lead with Kyosho type connector

Built-in jack for charging 4 or 5 cell Rx or Tx packs

*Standard to Deans Ultra Male Adapter available separately (GPMM3131)

*Standard to Vendetta, MiniQuake, RS4 Battery available separately (DTXC2210)

Protective Devices: Solid-state reverse polarity and current overload

Case size: 5.75 x 5.25 x 1.81" (146 x 133 x 46mm)

Weight: 19.2oz (543g)