RADIO 6CH SD-6G 2.4G AIRTRONICS 90406

Fly the SD-6G and you'll have a radio ready for just about every 6-channel aircraft and helicopter available today. From micro electric aircraft to scale aerobatic aircraft, from mini fixed-pitched heli's to advanced CCPM 3D electric helicopters, the SD-6G can handle it, and it'll do it glitch-free. The rock-solid Airtronics FHSS-1 spread-spectrum 2.4G equipment will give you protection from interference, and full-range performance you demand. And, with FHSS-1 from Airtronics, you know you're flying a fast radio, too. Latency on the SD-6G rivals that of radios that cost 2-3 times as much. You'll never have to worry about out-of-sync servos or mix-delays again.

Loaded with features using Airtronics locked-in 2.4GHz technology, and a value price, the SD-6G is the most versatile, affordable, performance-oriented 6-channel available today. Transmitter uses 6 AA batteries (included).

Fly Airtronics, Get the Advantage

RX-600
We've paired the SD-6G with the spectacular small-size full-range RX600 6-channel receiver. This receiver is compatible with all Sanwa 2.4GHz aircraft radios. It uses only two little antennas on extensions, so you can place them in the best spot for full-range performance. And at a weight of under 12 grams with case, it'll fit in just about every application. But, if it doesn't, Airtronics offers a wide selection of receivers from 5 gram 6-channel park flyer receivers to affordable 5-channel full-range receivers, Airtronics has the right receiver for your application.

Key Features:

• 10-Model Memory
• Advanced Airplane and Heli Software
• 3 Flight Modes (Heli and Air)
• P-Mixes
• 3-Axis Dual Rate and Expo
• 5-Point Throttle Curve (Heli and Air)
• Gyro Switch (Heli)
• Advanced Swashplate CCPM Mix (2 and 3 sx)
• Advanced Swashplate Leveling (Heli)
• Servo Monitor
• Throttle/Engine Cut Switch
• Trainer Compatible with SD-5G and SD-10G
• Adjustable Gimbal Spring Tension
• Advanced Aircraft Mixes
• Direct Select – Model Select Buttons

Program Features (Common for Both Heli and Air):

• Model Naming
• Model Select
• Model "Direct Select"
• Data Reset
• Data Copy
• Trainer System (Compatible with SD-5G/10G)
• Throttle Cut
• Wing/Swash Type
• Dual Rates (3 axis) (Common or Individual for Flight Modes)
• Exponential (3 axis) (Common or Individual for Flight Modes)
• 3 Flight Modes
• Individual or Common Trims
• Program Mixes (2)
• Servo Reverse
• Sub Trim
• EPA
• Servo Monitor
• Stop Watch

Airplane Functions:

• Wing Type
• 5-Point Throttle Curve
• Aileron Differential
• Flaperon Mix
• Flap-Elevator Mix
• Dual Elevator Mix
• Ailvator
• V-Tail
• Delta
• Program Mixes (2)
  (Note: Curves, D/R, EPA, All Mixes can be individual for Flight Modes)

Helicopter Functions

• CCPM/Swash Type (2 and 3 servo swash plates)
• 5-Point Throttle Curve
• 5-Point Pitch Curve
• Revo-Mix
• Gyro Control
• EPA for Individual Swash Servo (swash leveling)
• 3-Axis EPA post-mix
• Swash Mix Control
• Throttle Trim Inhibit for Aerobatic Flight Mode
• Program Mixes (2)
  (Note: Curves, Gyro, D/R, EPA, All Mixes can be individual for Flight Modes)

Specifications:

• 6-channel operation with RX600 receiver
• FHSS-1 Frequency-Hopping Spread-Spectrum
• 2.4GHz band
• Programming Features: Aircraft AND Helicopter
• 10-Model Memory
• Mode 2
• TX Battery: 6 AA 1200mAh Ni-MH

Includes:

• SD-6G Transmitter
• RX600 Full-Range Receiver
• 6 AA's (1200mAh Ni-MH Rechargable)
• Overnight Dual-Output Charger
• Detailed Instruction Manual