HELIC.NOVUS AH-1J COBRA 2.4 HMXE0805 (OUTLET) (SEM BATERIA)
- Código: 48965
- Marca: HELIMAX
- Estoque: Disponível
-
$59,00
Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.
PRODUTO ANTIGO; CAIXA BEM AMASSADA;
BATERIA NÃO INCLUSA
This is the electric powered, 2.4GHz radio controlled, ready to fly Novus AH-1J SeaCobra Helicopter from Heli-Max. Park Pilot Program Legal Aircraft
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES:
Rotor Head: CNC machined
Swashplate: CNC machined
Radio: Heli-Max 2.4GHz, 4-channel
Battery: LiPo 400mAh 1S
Battery Charger: AC wall type
INCLUDES: Novus AH-1J SeaCobra Helicopter with motor, 20T pinion gear, battery charger, radio and instruction manual
REQUIRES: AA Batteries: Eight for transmitter
SPECS:
Length: 9.0" (229mm)
Width: 2.7" (68mm)
Height: 3.3" (84mm)
Rotor Span: 7.9" (200mm)
Flying Weight: 2 oz (57.2g) with supplied flight battery
COMMENTS: **The fuselage for the Novus AH-1J will not work with the Novus FP.**
Only use the included charger with the included battery or replacement part (GPMP0409). Do not attempt to use this charger with NiCd or NiMH battery packs. Never charge in excess of 4.20V per cell. If the battery should become damaged, discard the battery. Do not attempt to use a damaged battery. Do not leave the charger unattended while charging. Disconnect the battery and remove input power from the charger immediately if either becomes hot! However, it is normal for the charger to get warm. Disconnect the battery from the charger and carefully move the battery to a fireproof location if the battery begins to swell or smoke! Never charge at currents greater than 1C. Always charge in a fireproof location. Never trickle charge. Never allow the battery temperature to exceed 150° F (65° C). Never disassemble or modify pack wiring in any way or puncture cells.
INCLUDES:
- Fully assembled Novus SeaCobra nano-sized helicopter
- 4-channel 2.4GHz radio system
- 120V AC wall charger
- Spare main and tail rotor blades
Specifications:
Rotor Diameter: 7.9 in (200 mm)
Weight: 2 oz (57.2 g)
Height: 3.3 in (84 mm)
Length: 9 in (229 mm)
Width: 2.67 in (68 mm)
Stock Number HMXE0805