HELICOPTERO ALIGN T-REX 300X SUPER COMBO RTF (EUROPLUG) RH30E03XT

Description

ALIGN T-Rex 300X new concept, small but perfect. It adopts DFC rotor head, low CG and low wind resistance which provide direct flight responses. The main carbon fiber frame is made of composite material and with reinforcement plate and reinforcement assembly which effectively improves structural intensity and torsional strength. The narrow body design makes the mechanical structure much stronger. The battery slider and the top-mounted engine design with an anodized bright red color give this model a pleasant texture. The aluminum alloy tail pipe is thickened for better resistance to twisting and increase the duration of the tail support rod. The progressive light landing pad makes this model the leader in this class. The canopy painted in fiberglass is light and with low aerodynamic resistance.

The high standard torque and the high efficiency 300MX 3700KV / 2216 brushless motor not only contribute to a significant increase in power, but the high efficiency cooling system allows a colder operating temperature during and after flights compared to the engine of the previous generation. Allow to provide constant power and maintain a stable RPM in 3D non-stop flight with perfect performance. It also pairs with the DS450 and DS455 HV digital servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed controller supports an adjustable BEC voltage of 5 ~ 8.4 V.

T-Rex 300X is small but all in one so that it can work well not only in indoor shows but also in 3D outdoor flights. This model offers you at the best price the opportunity to have fun flying at any time.

Standard Equipment:

• T-REX 300X DOMINATOR Kits Set x 1 set
• MiniGRS Flybarless System x 1 set
• 230 Carbon Fiber Blades x 1 set
• 50 Tail Blade x 1 set
• RCE-BL25A 25 Brushless ESC x 1 set
• 300MX Brushless Motor(3700KV 2216) x 1
• DS450 Digital servo x 3
• DS455 Digital servo x 1
• A10 Radio Control System Combo x 1 set
• MiniA.BUS Receiver x 1
• Balance Charger RCC-3SX x 1 set
• 3S1P 11.1V 1300mAh 30C x 1

• Length: 476mm
• Height: 158mm
• Width: 88mm
• Main Blade Length: 230mm
• Main Rotor Diameter: 525mm
• Tail Rotor Diameter: 143mm
• Motor Pinion Gear: 14T
• Main Drive Gear: 115T
• Main Drive Pulley: 40T
• Tail Drive Gear: 13T
• Drive Gear Ratio: 8.21:1:3.08
• Weight(witout battery): 418g

• Dial Pitch Gauge or Digital Pitch Gauge
• Swashplate Leveler