AVIAO PILOT RC DOLPHIN 71" JET W/ELECTRAT GEAR SCHEME 11

Designed as a perfect first jet trainer or just your everyday worry free easy to handle acrobatic jet. 

Easily repairable wooden design with a simple well known build method and simple gear, just drop equipment in and go fly!

FEATURES:

Wood construction with genuine Oracover (Ultracote) covering

Strong, lightweight and easily repairable construction methods

Two piece wing and two piece stabiliser all for easy transport

Pre-installed hinges (glued and pinned)

Servo operated gear doors

Optional LED Light Set

INCLUDED HARDWARE:

Complete air frame (including aluminium wing-tubes and fibreglass control horns)

Pilot-RC electric retracts and electric brakes

Dual wall tail pipe (for 60N turbines)

Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve

Air trap UAT 

Pre-prepared pushrods with ball links

REQUIRED HARDWARE:

Turbine: 60N 

Servos: 8 // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

BUILD INFO:

Aileron is 18 both up and down, Elevator is 18 up and 15 down, Flap max 36 Deg down, Rudder 25 both ways.

Flap/Elevator/Aileron mix is 36 Degree flap with Max 2.5 degree down elevator and 16 degree up aileron for landing.

Flap / Elevator mix is 25 Degree flap with Max 1.5 degree down for take off. for maiden flight do not use the flap to take off.

The CG is 205mm from the front leading edge on the root of the wing.

SPECIFICATIONS:

Model: Dolphin

Wingspan: 72″ (1,850mm)

Length: 71″ (1,800mm)

Wing area: 972 “² (6,270 cm²)

Weight: 16.7lbs (7.6kg)

VIDEO: