AVIAO FW PANDORA 4-IN-1 RED 1400MM (55") PNP FT30121P
- Código: 332002
- Marca: FREEWING MODEL
- Estoque: Disponível
-
$229,99
Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.
Freewing Pandora 4-in-1 Red 1400mm (55") Wingspan - PNP - FT30121P
The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sport low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear which the Motion RC Pilots think looks best on the low wing plane, and there is a set of "Big Wheel" landing gear in tail dragger format which is perfect for grass and dirt takeoff/landing. The "Big Wheels" even work on tall thick grass with ease.
You literally have 4 combinations and can make 4 different planes. This is a fantastic concept which is very enjoyable to fly. The Pandora does not get knocked around by the wind as much as a smaller plane. We don't recommend beginners fly any RC plane in a lot of wind but this plane is easier than most to fly in a bit of wind because of the larger size and weight. The guys at Motion RC think the Freewing Pandora may quickly become the plane of choice for both beginner and intermediate pilots.
FEATURES:
- High wing and low wing configuration included in one plane
- Tricycle landing gear and tail dragger landing gear included
- Included BIG wheels for tall grass takeoff and landings
- Molded wing pocket for optional flap servos - hardware and push rods are included
- Durable EPO foam construction
- Nylon hinges on all control surfaces
- Brushless motor, ESC, and 4 micro servos installed
REQUIRES:
- 4 Channel Radio - Select a minimum 4 channel radio
- 4 Channel Receiver - Select a minimum 4 channel receiver
- 3 Cell 11.1V 2200 mAh Lipo Battery with XT60 Connector
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S)
PRODUCT SPECIFICATIONS:
Wingspan | 1400mm/55.1in |
Length | 1180mm/46.5in |
Flying Weight | 1500g / 53 ounces |
Power System | Brushless 3536-800Kv |
Speed Control | 30A, Internal BEC, XT60 connector |
Propeller / EDF | 11x6 3 blade prop |
Servos | 9g plastic gear standard with 200mm lead : elevator |
Landing Gear | Fixed tricycle or tail dragger. Small or large wheels |
Required Battery | 11.1V 2200mAh 25C 3 cell LiPo with XT60 connector |
Required Radio | 4 Channel |
Rudder | Yes |
Flaps | Optional -molded servo area and flap cut outs |
Ailerons | Yes |
Lights | No |
Hinge Type | Nylon hinges on all control surfaces |
Material | EPO Foam |