FMM097BLU AVANTI JET 70MM BLUE

The fantastic 70mm EDF Avanti here! Avanti is a mutual-developed airplane made by FMS team from China and Sebart Team from Italy. The original design and authorization are from Sebart, with the additional FMS advanced production concept, it is finally being a promised finest work.

Utilizing many new concepts and technologies from existing planes, this highly anticipated Avanti has the inherent ability to offer a rip-roaring flight.

We have optimized the airframe structure markedly to make your time in getting ready for flight quick and easy. The assembly is very straightforward: 7 screws and a carbon fiber wing spar and you are finished. The Avanti features the latest FMS locked-rotor mode E-retract with overcurrent protection, the CNC-processed shock-absorbed front and rear metal landing gear set (Worm Dia. 8mm), a 50mm diameter front wheel and 55mm rear wheels. These are excellent for taking off and landing on both paved and grass surface airfields.

The power system, which provides tremendous thrust and speed, utilizes our new and improved 70mm 12-blade EDF V2, KV1850 motor system. This brawny system, when coupled with a 6S battery, provides a resonating turbine engine sound.

The environmentally friendly water-based paint provides a vibrant and visual red scheme that makes this airplane look fantastic on the ground and in the air.

Go get the Avanti and discover for yourself this new addition to FMS' growing EDF fleet.

Powerful motor with the latest 70mm 12-blade EDF.

With a 70A ESC, 6S power system ensures a record speed of more than 130km/h.

Metal CNC locked-rotor mode E-retract with overcurrent protection.

No glue required, screw-together construction.

Button Type canopy hatch.

Multi-connector for one-step installation.

Metal digital servos for excellent controlling capacity.

Large battery compartment.

Pre-installed, newly designed ball link style control horns for more throw.

50mm front wheel and 55mm rear wheels.

Notes from our tech department:

FEATURES

Construction: EPO foam, repairs can be made with foam safe adhesives such as hot glue, foam safe CA and 5 minute epoxy, screw together construction

Wing: Two-piece, with carbon fiber wing spar

Brushless Motor: Inrunner 2860-KV1850

Ducted Fan: 70mm 12 blade

Electronic Speed Control: Predator 70A

Servos: Eight 9g metal gear

Landing Gear: FMS locked-rotor mode E-retract with overcurrent protection, CNC-processed shock-absorbing front and rear set (worm dia, 8mm) 1.97" (50mm) diameter front wheel, 2.2" (55mm) front wheels

Canopy: Button type with painted-on frame lines and pilot figure

INCLUDES

Avanti 70MM (Blue) PNP (Plug-n-Play) with Motor, ESC, Ducted Fan Unit, Servos and Instruction manual

REQUIREMENTS

Radio: 6+ channel

LiPo Battery: 6S 22.2V 2600-3300mAh 35C

Battery Charger: Compatible with selected battery Field equipment

SPECIFICATIONS

Length: 41.3" (1050mm)

Wingspan: 35.4" (900mm)

Flying Weight: Approximately 61.7 oz (1750g)

Wing Loading: 0.23 oz sq/in (101.7 g/sq dm)

Wing Area: 266.6sq in (17.2 sq dm)

Center of Gravity, CG: 3.9 - 4.1" (100 - 105mm) from leading edge of wing with battery pack installed

Control Throws Low Rate High Rate

Elevator, up/down: 0.47" (12mm) 0.66" (17mm)

Aileron, up/down: 0.39" (10mm) 0.59" (15mm)

Rudder, up/down: 0.78" (20mm) 1.18" (30mm)