O que você está buscando?





  • REDCAT 1/10 EVEREST-G7 PRO GREEN 131800

REDCAT 1/10 EVEREST-G7 PRO GREEN 131800

  • Código: 267656
  • Marca: REDCAT
  • Estoque: Indisponível
  • $349,00

Compartilhar

Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.


Take the terrain less traveled

Rugged tires, tough roll cage, extra equipment, high angle steering–the Everest Gen7 is exactly what an offroader ought to be. It's made with ruggedness in mind. Not only is the roll cage tough, but it's firmly attached to the chassis–no half measures here. Plus, the heavy duty plastic fenders keep everything in running order after hard knocks. Equipped with a 3mm steel ladder frame chassis, this off roader is fully ready for absolutely anything your trail of choice can dish out. Gear up and roar out!

  • Fully built and ready-to-run trail truck
  • Installed 550 brushed motor
  • Hexfly metal gear servo
  • Hexfly ESC that can handle 2-3S LiPo power or 5-9 cell NiMH
  • Redcat Racing RCR-2CE 2.4GHz radio with waterproof receiver
  • 3mm steel ladder frame chassis
  • Chassis mounted roll cage
  • 7.2V, 3000mAh battery and charger
  • Four wheel drive
  • Aluminum coilover shocks
  • Aluminum wheel hexes
  • CVA front axles
  • Metal spool axle carrier
  • Steel axle skid plates
  • Rear axle lockouts
  • Upper 4-link mount
  • Licensed Interco Super Swamper tires
  • Detailed, useable accessories

 

This is the 1/10 scale Electric Powered, 2.4GHz Radio Controlled, Everest Gen7 PRO Off-Road Truck with Green Body from Redcat Racing.


The PRO Version of the Gen7 Adds:

  • Body Tilt System
  • Roof Rack w/ Scale Gas Cans, Shovel, Ramps, Jack and More
  • Functional Spare Tire
  • CVD Front Axles
  • Aluminum Body Shocks
  • Snorkel & Foldable Mirrors
  • Hard Plastic Inner & Outer Fenders
  • Roll Cage
  • Front and Rear Metal Skid Plates

 

FEATURES

  • Chassis: 0.12" (3mm) thick steel ladder frame with powder coated black finish, multiple suspension configurations, front and rear metal skid plates
  • Drive: Four wheel with CVD front axles
  • Radio: RCR-2CE 2.4GHz with steering and throttle trim and reverse and dual rate steering
  • Motor: 550 size brush equipped
  • Electronic Speed Control: Hobby Wing waterproof, LiPo ready, three adjustable drag brake modes, Supertigre battery connector
  • Battery: 7.2V NiMH 3000mAh
  • Battery Charger: Hexfly HX-650M wall charger
  • Shocks: Aluminum, oil-filled, adjustable
  • Body: Trimmed and painted with body tilt system for easy access to battery and electronics, standard body mounts & R-clips included if tilt system is not desired, roof rack with functional spare tire, ramps, jack, shovel, two gas cans and light bar (lights not included), snorkel and folding mirrors, hard plastic inner and outer fenders and roll cage
  • Front and Rear Bumpers: Highly detailed with shackles, LED mounts and functional trailer hitch
  • Tires: Interco Super Swamper 4.5" (115mm) diameter
  • Wheels: 1.9" (48mm) diameter, 1.8" (45mm) wide black plastic wheels w/functional steel beadlocks designed to accept wheel weights (weights not included)

 

INCLUDES

Everest Gen7 Pro Off Road Truck with Radio System, Motor, ESC, Battery, Charger, Body w/Roof Rack, Accessories and Roll Cage Tires, Beadlock Wheels and Instruction Manual

 

REQUIREMENTS

AA Batteries: Four for transmitter Track and maintenance equipment

 

SPECIFICATIONS

Vehicle;

  • Length: 20.5" (521mm)
  • Width: 9.5" (241mm)
  • Height: 11" (279.4mm)
  • Wheelbase: 12.3 - 12.6" (313 - 321mm)

Body:

  • Length: 18" (457mm)
  • Width: 8.8" (223mm)
  • Height: 5.1" (129mm) not including roof rack

Escreva um comentário

Você deve acessar ou cadastrar-se para comentar.