MOTOR OS .15CV-X W/RECOIL 11523

This is the OS Max .15CV-X Pull Start RC Car/Buggy Engine. It has the Same Mounting and Muffler Dimensions as the .12CV and CZ-R. **** Now comes with the recoil OSMG8978 ******

FEATURES:

• Unique Blue, "Heat Vent" Squared, Diagonal Slotted Cylinder Head Charcoal Gray Finned Crankcase Rotatable
• Carburetor Secured to Crankcase by Pinch Bolt
• New #10E Rotary (not Slide Valve) Carburetor w/Dual Needle for High and Low Speed, Idle Adjustment & Screwdriver Adjusted Needle
• Valve Front and Rear
• Ball Bearings Side Exhaust
• Can be converted into a .15CVX-DF (See Comments)

INCLUDES:

• One Assembled .15 CV Pull Start Engine
• One Super 102 Air Cleaner
• Three Blue Foam Elements
• Four 3x14mm Phillips-Head Round Head Screws
• Two L:20mm, W:6mm, H:4mm Engine Mount Spacers
• One Set of Instructions w/Parts List and Decal Sheet
• One #A3 Glow Plug (OSMG2690)

SPECS:

• Displacement: 2.49cc (0.152 cid)
• Weight: 264g (9.32oz)
• Bore: 15.2mm (0.598")
• Stroke: 13.7mm (0.539")
• Power Output: 0.68 bhp @ 29,000 RPM
• Practical RPM: 3,000-30,000
• Crankshaft Thread: 5mm
• On-Center Mounting Holes, Front to Rear: 11mm
• On-Center Mounting Holes, Side to Side: 31.4mm
• On-Center Exhaust Mounting Holes: 27.5mm
• Back of Engine to Front of Drive Washer: 74.7mm (2-15/16")
• Engine Height: 84mm (3-9/32")

Needle Settings:

High Speed: 2 turns out from fully closed Mixture Control (low speed): flush with carb body

Throttle Stop Screw: 1/2 turn out from fully closed closed

REQUIRES:

Fuel with at least 16% lubricant and 10%-20%

Nitro (Most of the 5%-15% fuel we carry meet this requirement)

Muffler (exhaust system) depending on vehicle

COMMENTS:

To convert this engine into a .15CVX-DF for Ducted Fan airplanes, purchase this engine along with the Heat Sink Head (OSMG5181) and the #2F Carb