AVIAO TO YAK 54 EP 3D ARF TOHA1003

This is the electric powered, radio controlled, almost ready to fly, Yak 54 31" Flat Foam Profile Monoplane from Tech One.

Super slow flight responsiveness for high alpha 3D flights.

Ideal for indoor flight and capable of outdoor flight in light winds.

FEATURES: 

• Construction: 0.12" (3mm) thick EPS foam with carbon fiber truss system to add strength and eliminate flex
• Wings: One-piece
• Aileron Control: Single servo
• Landing Gear: Rods with 1" (25.4mm) plastic wheels, foam wheel covers and carbon fiber strip for tail skid
• Pushrods: Carbon fiber
• Building Time: Ready to fly in approximately three hour

INCLUDES:

Yak 54 31" Flat Foam Profile Monoplane with landing gear, pushrods, hardware and instruction manual

REQUIRES:

• Radio: At least 4-channel
• Servos: Three micro high-torque (1-aileron, 1-rudder, 1-elevator)
• ESC: 8 - 10A brushless capable
• Motor: 250 or 300 Electrifly Rimfire Brushless recommended
• Battery: 2S 300mAh LiPo
• Battery Charger: LiPo compatible
• Propeller: 9x5 slow flyer
• Building and field equipment

SPECS: 

• Fuselage Length: 31" (786mm)
• Wingspan: 32" (815mm)
• Flying Weight: 4.6 - 5.3oz (130 - 150g) with battery
• Center of Gravity (CG): 2.95" (75mm) from the leading edge of the wing, measured at the center of the wing
• Control Throws - Sport - 3D
• Ailerons: Up and Down - 1.46" (37.2mm) - 4.03" (102.3mm)
• Elevator: Up and Down - 1.15" (29.2mm) - 3.45" (87.6mm)
• Rudder: Right and Left - 1.73" (44mm) - 5.20" (132mm)
• Control throws are measured at the widest point of the control surfaces
• Exponential - Sport - 3D
• Ailerons: - 20% - 45-55%
• Elevator: - 20% - 45-60%
• Rudder: - 20% - 45-60%

MANUAL